How Can I Improve My Gutter Drainage?

Roof Gutter Drainage Pipe Pictured with White Exterior of House

How Do You Trench Downspouts on Gutters?

Improving your roof gutter drainage pipe is a worthwhile pursuit for homeowners experiencing water pooling issues. One of the ways you can accomplish the goal of having better drainage around your home is through controlling your roof runoff so that it does not impact the foundation of the home. Installing a drainage pipe is a forthright way of producing a positive impact on your home’s water drainage ability. There are three phases to this process: digging the trench, laying down the pipe, and then filling the trench with soil. In order to trench the downspout, you will need to first use a string and stakes to lay out the trench. This enables the homeowner to plan out the execution stage. Next, the trench line can be marked with flour from a can. After that, the trench will need to be dug. Depending on the kind of soil in your yard, and the depth of the trench, more tools may be required than just a shovel. A trenching machine may be procured and applied for this process.

How Many Downspouts Do I Need On My Gutter?

Downspouts are known as the vertical spouts attached to the gutter system, effectively funneling water off of the roof, and in a safe direction. Gutters should have a downspout installed every thirty to forty feet. For most homes, this means that gutters are typically installed at the front and back end of a gutter section. There are exceptions to this rule, however. The amount of roof area, roof slope, gutter size, and climate will ultimately factor into how many downspouts are necessary for installation. The more roof surface above the gutters, the more rainwater will be caught and funneled down into those gutters. A high slope for a roof entails that water will run down faster – an extra gutter downspout will alleviate this high-velocity impact. Larger gutter sizes can hold more water and can decrease the number of spouts necessary for a home. Finally, if a person lives in a climate that does not have impactful storms, a better drainage system may not be as integral.

Where Should Gutter Downspouts Be Placed?

Once again, there are considerations to manage. Depending on the orientation of the home on a slope, the local climate, and the architecture of the home, downspouts will change in number and range. For example, if a home is oriented on the top of a hill, and gutters may only need to be installed on one side of the home. Some roofers suggest that downspouts should be placed once per twenty feet, but if the local climate does not dictate that there are heavy thunderstorms, the expense may not be necessary. Gutters and gutter downspouts should work functionally and fluidly with the home. Too many downspouts, or downspouts oriented in the wrong direction, could increase the potential water damage.

How Deep Should Gutter Drain Pipe Be?

While gutters and downspouts move the rainwater away from the house, most of them end only a foot away from the foundation. There are times when this length is not adequate to stem the impact of water damage on the foundation of the home. In cases like these, homeowners may resort to gutter splash pans or downspout extensions to move the water away. For a neater appearance, it is suggested that homeowners bury their downspouts. It is recommended that a trench be dug approximately six inches wider than the drain pipe to be buried. Additionally, the trench must be deep enough so that the drainpipe sits three inches below grade.

How Far Should Downspouts Be From the Foundation?

Building codes generally recommend that water should be diverted approximately ten feet away from the home foundation. In general, the further away water is from the home foundation, the better. The slope of the home is an important consideration as well. Water travels downhill according to the principles of physics, which means that when gutters are installed, allocations should be made for these processes.

Roof Gutter Drainage Pipe With Wooden Soffit

Rain Gutters and Drains

If water pools around your home, gutter installation can provide an extraordinary amount of relief. It is true that bad drainage can put your home at risk for serious water damage. Even for homeowners who already have a sump pump installed, water can still affect the surrounding architectural elements to the detriment of the homeowner. The term “french drains” is used to describe a specific type of gutter drain that is essentially a trench with sand or gravel that allows the water to flow away from the home in the direction of the grade. French drains are only one of several different methods that can be employed to remove excess water from around the home. Extending the downspouts, routing the water into a storm drain or dry well, and checking for low spots around the home can greatly assist.

How to Clean Rain Gutter Drainage

Rain gutter drain pipes are usually installed to carry water away from the home, with many of them installed underground. Roof gutter drainage pipe systems can become clogged, thus making routine maintenance a crucial part of such a homeowner’s agenda. Homeowners are encouraged to check where the water drains out of the pipe, and remove any detritus that has accumulated there. A flashlight is a handy item to have, as it can be used to determine what elements have clogged the pipe. Additionally, a plumber’s snake and a water hose can also be used to great effect in eliminating waste in the clog. Do you require trenchless excavation for your underground pipelines? Trenchless excavation can greatly assist with repairs and replacements for your buried pipes.

Rain Gutter Drainage Underground

Architecturally speaking, gutter downspouts that enter the ground and release accumulated water into the soil is an insightful development. There are a number of benefits involved which should be explained thoughtfully. Water that travels underground does not have to meander through the landscaping. Alternatively, rainwater that travels aboveground can leave behind a trail of soil erosion, snaking through the ecology and causing disarray. Another potential benefit is the fact that during freezes, water that is released below ground stands no risk of causing the hazards of a slip-and-fall incident.

What is Roof Drainage

Consult the following list to determine how you can have roof drainage installed for your home or business.

  • Roof scupper. A roof scupper is a water drainage device that allows water to run off the roof and exit through a metal edge, parapet wall or through the deck into a downspout.
  • Roof drain. A roof drain is a method of draining a roof assembly where the water runoff from the roof is transmitted through the roof drain and into piping. This piping runs through the interior of the building and eventually empties into a storm sewer or onto grade.

Scheduling an appointment for your roof gutter drainage pipe has never been easier. Our staff at Spruce Exteriors LLC are ready to take your phone call at 515-240-1995. Discover more about your roof gutter drainage pipe in Des Moines Metro, IA with our experts.